Home>All Products>Passive Network Components>Tools & Tester>Cable Puller with Cylinder for Cable Conduct up to 15 meter

LogiLink® Cable Puller with Cylinder for Cable Conduct up to 15 meter


  • Cable puller
  • Suitable for Power-, Network-, Telephone cables
  • Simplified installation even in complex cable shafts
  • and difficult enviroment
  • Suitable for straight and curved cable ducts
  • Roll up mechanism for the guide wire
  • Fixing system for cable end
  • Pratical carring handle, fixed locking device
  • Material: hardened metal, plastic drum
  • Length: 15 m

Order Id: WZ0006

EAN: 4260113563762

PU: 12 Pieces

Tool for guiding cables in cable channels and shafts of LogiLink. The cable is clamped on the fastening system and then introduced into the cable shaft. Through the leadership ability, the cable can be pulled through straight, curved and directional changing channels. Suitable for power, network or telephone cable. The guide wire is hardened and is rolled up in a practical ring.

Technical Hotline: 10:00 a.m - 06:00 p.m, (+49) 2351-66887-19
(German landline number)

Email: support@logilink.com
Similar Articles:

WZ0001A - LSA Punch Down Tool

WZ0003 - Crimping tool universal with cutter and isolater metal

WZ0004 - Crimping tool for RJ45 with cutter metal

WZ0005 - Isolation and cutting tool for patchcable

WZ0007 - Cable Puller with Cylinder for Cable Conduct up to 30 meter

WZ0008 - Cable Puller with Cylinder for Cable Conduct up to 60 meter

WZ0009 - Crimping tool for RJ45 with cutter

WZ0010 - cable tester for RJ11, RJ12 and RJ45 with remote unit

WZ0011 - cable tester for RJ45 and BNC with remote unit

WZ0012 - Networking Tool Set with Bag

WZ0013 - Crimping Tool for 8P8C Hirose metal

WZ0014 - Cable Tester 5-in-1 with Remote Unit

WZ0015 - Cable Tester with Remote Unit

WZ0015P - Network cable tester with PoE finder

WZ0016 - Wire Cutter

WZ0017 - HDMI Cable Tester

WZ0019 - Crimping Tool for Modular Plugs 8P8C

WZ0020 - Screwdriver Set

WZ0021 - Screwdriver Set

WZ0022 - Small Screwdriver Set

WZ0023 - Tool Set

WZ0024 - IDC Punchdown Tool with wire stripper, plastic

WZ0028 - PoE Finder, Power Over Ethernet Status Detector

WZ0029 - Crimping tool for Cat.6 and Cat.6A 8P8C (RJ45) shielded plug

WZ0030 - Networking Tool Set with Bag

WZ0031 - Digital Caliper

WZ0032 - Networking cable stripper with cutter

WZ0033 - Crimping Tool for Modular Plugs 8P8C

WZ0034 - 3. Helping Hand with Magnifier

WZ0035 - Multi-function Crimping Tool for Modular Plugs PrimeLine

WZ0036 - Cable drum roller

WZ0037 - Crimping tool for RJ11/12/45/EZ plugs, with cutter

WZ0038 - Cage nut insertion & extraction tool

WZ0044 - Multitool

WZ0049 - Fiber Optic Visual Fault Locator (Fiber Checker) 10 mW for 2.5 + 1.25 Ferrules